Small Mechanical Pure Dry Type Copper Scrap Metal Granulators 80-100 Kg/H

Brife Introduction

Waste copper wire granulator machine is mainly used for recycling waste copper wire, waste wire, waste cable and so on. The diameter of cable processed is less than 25mm, better for single conductor diameter of 0.2-0.5mm.Simply speaking, it is to crush the waste copper wire, wire and cable first, and then separate the crushed copper and plastic to achieve the distribution and utilization after separation. Because the separated copper looks as big as rice grain, it is called "copper rice machine", which can also be seen that it is an environmentally friendly mechanical product.

Working principle

1. Crushing. First crush the cable into copper and plastic granules. The size of granules are generally 2-8 mm after crushing.

2. Separating. Using the principle of different specific gravity of copper and plastic, two kinds of media with different specific gravity are separated by air flow and vibration.

Machine Features

After crushing and processing of waste wires and cables, automatic mechanical separation can completely separate copper and plastics, and achieve the purpose of comprehensive utilization, with high economic benefits. In addition, the equipment is an integral combination structure, easy to install and debug, and transport (customers can be purchased after the power supply can be produced), stable performance.

1. Compact structure, beautiful appearance, reasonable layout and convenient installation.

2. Fully automatic intelligent control makes the equipment feed uniformly and operate intelligently, which makes the operation more convenient, time-saving and labor-saving, and ensures the stable operation of the equipment to the greatest extent.

3. The crusher is roll-to-roll, with low speed, high torque, large output, low noise and simple operation.

4. Platform combination is adopted for crusher, sorting equipment and dust collecting equipment, which makes the equipment easy to move and transport, and increases the flexibility of equipment.

5. The alternating cutter shaft is used in the rotor of the crusher, which makes the crusher more efficient, less noisy and more stable in operation.

6. The sorting rate of air separation equipment is over 99%.

7. The recycling system makes the semi-finished products comminuted twice, which ensures the complete separation of metal and non-metal.

Power

Technical parameters

copper wire granulator separator

scrap metal granulators

Small Mechanical Pure Dry Type Copper Scrap Metal Granulators 80-100 Kg/H Images